Car A600 HUD Display, OBD2+GPS Smart Gauge HD 3 LCD Screen Display Adjustable Bracket, Speed KM/H RPM Voltage Car Digital Speedometer For All Cars With OBD

Car A600 HUD Display, OBD2+GPS Smart Gauge HD 3 LCD Screen Display Adjustable Bracket, Speed KM/H RPM Voltage Car Digital Speedometer For All Cars With OBD

• CLEAR DISPLAY: Mallofusa New Updated HUD, OBD2+GPS Gauge, 3 LCD Screen Display, Can stick to windshield or put on dashboard, LED display more safe for driving. OBD and GPS mode can display at the same time by switch the display interface, GPS mode can work for all cars. Display the information and read it easier while driving. When alarm, the middle circular screen frame will be red and flashing.
• OBD+GPS SYSTEM: Display vehicle data such as speed, engine RPM, battery voltage, fuel consumption, coolant temperature, turbo, oil temperature etc. Warnings related to exceeding the programmable speeds or RPM. Very clear in daytime and night, HUD will power on/off with engine on/off, Easy for use. display the data clearly whether day or night. 3 different display interface can be free switched in one screen.
• EASY TO INSTALL: Stick to windshield or put on the dashboard. The bracket can be rotated in all directions to adjust the visual angle and height. The Smart Gauge connects to the vehicle via OBD cable, plug and play. Can display speed, water temperature, voltage, fuel consumption, clock, distance travelled per trip, time travelled per trip, oil temperature, intake pressure(psi) etc. Muti reminders help you avoid the accidents and keep your driving safely.
• MULTI REMINDERS AND ALARM: 9 kinds display interface. The display interface can be free switch. Alarm function, improve driving safety: speed alarm/ high water temperature alarm/ low voltage alarm/ fatigue driving alarm/ engine fault alarm/ overspeed alarm/ gear shift reminder/ eliminate fault code.When the speed is switched to MPH per mile, the water temperature will be automatically switched to Fahrenheit degrees, the single driving distance will also be automatically switched to Miles.
• PLUG AND PLAY: Car HUD is suitable for all cars with OBD2 interface.Plug-and-play HUD. The default display OBD2+GPS mode at the same time,if your car donnot have OBD2 protocol,it will only show GPS function. It takes only 3 steps to install through the user manual on your car.And when you start your car,the HUD gets on automatically and starts to work without any other operation.
• OBD2+GPS Smart Gauge, for All Cars. Please check your car has OBD2 interface
  
  Specification:
  -Display Interface: speed, engine RPM, battery voltage, fuel consumption, altitude, coolant temperature, turbo, oil temperature etc
  -Two installation methods: put on dashboard or stick to windshield
  
  Features:
  1, New Updated HUD car display, OBD2+GPS Smart Gauge, Adjustable Bracket, 3 LCD Big Screen
  2, HD LED display, the KM/H and MPH display interface can be free switched
  3, The default mode is OBD2 mode,If your car don't have OBD2 protocol,please switch to GPS mode
  4, The Smart Gauge connects to the vehicle via OBD cable, plug and play
  5, AP-7 is dual model OBD+GPS 2 in 1, the system is more stable and smooth, data display is more abundant. OBD+GPS system with multi-function:
  OBD mode: can read more than 100 kinds of data in the car
  GPS mode: satellite speed/clock/altitude/satellite number/compass/driving time etc.
  6, 9 kinds display interface:
  Simple function; Speed; Multi-function; 6 kinds information; Turbo pressure(Please note: if the car don't have turbo, then there's no data); Acceleration test(The time from 0 km/h to 100 km/h); Brake test(The time takes when step the brake until car stop); Data stream
  7, When the speed is switched to MPH per mile, the water temperature will be automatically switched to Fahrenheit degrees, the single driving distance will also be automatically switched to Miles, and the fuel consumption will also be automatically switched to gallons MPG
  
  Easy to install:
  1, Turn the ignition off, connect the OBD cable to vehicle OBD2 interface
  2, Connect the OBD cable to the OBD interface on Smart Gauge
  3, Hide the OBD cable in A-pillar. Turn the ignition on, then it can work
  
  Package Included:
  1 x OBD+GPS Gauge
  1 x OBD2 cable
  1 x 3M tape
  1 x Hexagon wrench
  1 x Crowbar
  1 x Manual